|
|
RADIO Studio Transmitter Link
Nicom
FM STL Transmitter System
|
Model
|
Description
|
Price
|
|
RSL 900 STL Receiver
|
Features: Frequency Ranges:
940 to 960 MHz 200 to 240 MHz - 300 to 330 MHz + other
frequencies upon request; Input Impedance & Connector:
50 ohm type 'N' female; Audio Frequency Output:
0 dBm at 600 ohms +/- 6dB adj.; IF Output: 0dBm
at 10.7MHz / 50 ohms; De-emphasis:
50 / 75us; Input Voltage Range: 10uV - 30mV rms. |
$2,380.00
|
|
TSL 910 STL Transmitter
|
Features: Frequency Ranges:
940 to 960 MHz - 200 to 240 MHz - 300 to 330 MHz +other
frequencies upon request; Output Impedance & Connector:
50 ohm type 'N' female; Harmonic Frequencies Level
(ref. to carrier): < -65 dB; Spurious Frequencies
Level (ref. to carrier): < -80 dB; Input
Impedance: 600 ohms or greater; Input
Level: -6 dBm to +10 dBm nominal for +/-75 Khz
deviation adj. |
$2,720.00 |
|
Total System
|
Zero to 12 watts output power,
front panel adjustable; Remote control built in in RS
232; Externally programmable in 25 Khz steps; 3 SCA's;
RF monitoring BNC in the transmitter's front panel; IF
monitoring in the receiver's front panel; All functions
via LCD password protected; Monitoring software included;
Meets or exceeds all FCC and CCIR requirements. FOB: National
City, CA |
$5,100.00 |
Top
OMB
MT/MR Platinum STL
|
Model
|
Description
|
Price
|
|
MT/MR Platinum
|
The MT/MR
PLATINUM FM STL (Studio to transmitter Link), is
one of the latest OMB products. It is made up of a 20W
(200~960MHz)transmitter externally synthesized in 20MHz
sub-bands with a step of 10-25-100KHz (customer request),
microprocessor controlled, LCD display for the visualization
of the most relevant transmission parameters (frequency,
forward and reflected power, modulation level, pilot signal
…), balanced Mono, Stereo (MPX) and 3 SCA inputs
and SWR fold back protection. Furthermore, the "MT/MR
Platinum" STL includes a jumper in order to get a
proper operation with digital signals. |
$3,920.00 (940-960MHz)
$3780.00 (170-570MHz) |
MT/MR Platinum >1GHz
|
Model
|
Description
|
Price
|
|
MT/MR Platinum >1GHz
|
The MT/MR PLATINUM >1GHz
is a high-performance Studio-to-Transmitter Link. It is
made up of the 5W MT transmitter externally synthesized
in 10MHz sub-bands with a step of 10KHz, and the MR double
conversion receiver, that is externally synthesized too.
The MT is microprocessor controlled, and includes LCD
display for the visualization of the most relevant transmission
parameters (frequency (6-digit), forward and reflected
power, modulation level), balanced Mono, Stereo (MPX).
The MR receiver has the same visualization system than
the transmitter. It includes balanced Mono and Stereo
(MPX) outputs. Furthermore, the "MT/MR Platinum"
STL includes a jumper in order to get a proper operation
with digital signals. |
$4,750.00 |
Top
Marti Electronics
STL-20M
|
Model
|
Description
|
Price
|
|
STL-20M
|
The STL-20M is a new Mono STL that incorporates
the proven synthesizer and RF power amp design that is
now in the SRPT-30, SRPT-40A and the STL-20C. This unit
is being introduced first in the 940 to 965 MHz band and
delivers 20 watts of power. This is the most powerful
mono STL transmitter on the market today. Features: Frequency
Range and Continuous Duty Maximum Power Output
- 50 ohms (± 10%) 940-965 MHz, 20 Watts; Frequency
Selection - For the 940-965 MHz STL band. (Can be
set for 20 or 25kHz steps. Single frequency is factory
set.); Front Panel Controls - On/Off, Power Adjust,
Meter Switch; Metering - Precision "Peak Hold"
Bar Graph Modulation Meter. Indicates forward power, reverse
power, PA current, subcarrier level. LEDS indicate transmit,
AFC lock, High VSWR, and High Temp. FOB: Quincy, IL. |
CALL/EMAIL |
STL-20C
|
Model
|
Description
|
Price
|
|
STL-20C
|
The STL-20C is our latest composite STL
transmitter. This transmitter replaces the STL-15C for
the 950 MHz band. Features: Frequency
Range and Continuous Duty Maximum Power Output (±10%)
- for 940 to 965 MHz only. 20 Watts; Metering
- Precision "Peak-hold" Bar Graph Modulation
Meter. Indicates forward power, reverse power, PA current,
subcarrier level. LEDs indicate transmit, Composite Mode,
Mono Mode, AFC lock, High VSWR, and High Temp.; Composite
Audio Inputs - BNC Connector, 5 K ohms, 3.5v p-p
for 100% modulation
Audio Inputs - Balanced 600
ohms Barrier strip; Audio Input Level
- +8 dBm; Subcarrier Inputs
- Two BNC connectors for Remote Control and Subcarrier
Inputs, 50 to 600 ohms unbalanced; Accessory
Connector - 15 pin connector on rear panel provides
filtered outputs for Remote Control, Remote Power Metering;
RF Connector - Type N Female.
FOB: Quincy, IL
|
CALL/EMAIL |
Top
Radio Microwave Antenna
Nicom Radio STL Antennas
RKB 14
Model |
Description |
List Price |
RKB 14 |
This antenna was created to be used for STL purpose. It is very light and easy to use. Due to its construction, this antenna is not suggested to be used in areas with severe weather. It comes with N type connector. |
$195.00 |
Grid Reflector Antenna
BKP 950
Model |
Description |
List Price |
BKP 950 |
The Nicom Grid Reflector is a semi-parabolic antenna with high gain used for STL systems in the 940-960 MHz range. Our engineers have effectively designed this antenna of stainless steel, making it much stronger and more durable in all weather conditions as compared to similar aluminum antennas. Although of steel, the wind load and weight have not been increased. Mounting brackets for up to 3¼" are included as standard equipment. |
$990.00 |
Top
Andrew
Mini GRIDPAK Antennas
|
Model
|
Description
|
Price
|
|
MKP
|
GRIDPAK Antennas for FM- Unpressurized
Single Polarized. Inputs: 7/8" EIA, "F"
Flange Female, Type N Female and 7-16 DIN Female. 820-960
MHz. |
CALL
|
OMB
|
Model |
Description |
Price |
|
ANT RR
|
The ANT RR is a Yagi-Uda antenna that has
been designed to be used with vertical or
horizontal polarization. It provides wide
bandwidth and high-directivity. It is made up of
14 elements, a reflector and a dipole. The ANT
RR is made of stainless steel, and is protected
by a polyester radome in order to allow working
in really hard environmental conditions. |
Call/email |
|
Model |
Description |
Price |
|
ANT TX-RR
|
The ANT TX-RR is a high-quality
low-cost Yagi-Uda antenna, designed to be used
with vertical or horizontal polarization, and to
provide high-directivity. It is made of
aluminium with stainless steel clamps, and the
output connector is N Female type. Its
radioelectric inalterability has been tested.
Furthermore, ANT TX-RX provides high gain, is
really light and it can work even in really hard
environmental conditions. It is manufactured for
frequencies between 175 and 960MHz, in 20/30MHz
bands. It offers from 10 to 14dB gain depending
on the operating frequency. |
Call/email |
|
Model |
Description |
Price |
|
TX-RR
1660-1670
|
The TX-RR 1660-1670 is a
high-quality low-cost Yagi-Uda antenna, designed
to be used with vertical or horizontal
polarization, and to provide high-directivity.
It is made of stainless steel, brass and PVC
radome. The output connector is N Female type.
Its radioelectric inalterability has been
tested. Furthermore, the TX-RX 1660-1670
provides high gain, is really light and it can
work even in really hard environmental
conditions. |
Call/email |
Top
All prices are list, please
call or email for a quote
|
